Fiber integrated collimator
■ For positional light source capture harness type
This is prove type fiber collimator with one end connector.
Suite for measurement of LD or LED positional light source.
| Common specification | |||||||
|---|---|---|---|---|---|---|---|
| Collimate lens | Plano-convex glass(single lens structure) | ||||||
| Housing materials | SUS pipe | ||||||
| Planned wavelength | 587.6 nm | ||||||
| Insertion loss | Less than 0.5 dB(λ = 400?1500 nm) | ||||||
| Focus diameter | Fixation(select the lens that suite the purpose) | ||||||
NOTE：
＊Standards of use as collimate light：
・FCR/DD4：Beam diameter φ0.6 mm / WD less than 400 mm
・FCR/DD6.25 :Beam diameter φ1 mm / WD less than 1500 mm
・FCR/DD8 は：Beam diameter 1.3 mm / WD less than 2000 mm
