FC connector type（For８° angled polish）
- Usually, output optical axis will be offset when using standard collimator. However, this product will make vertical optical axis. It is possible to adjust that distance or beam diameter as you need by adjustment mechanism.
- ※Low output or high output by heat sink is available.
■For FC 8° angled polish
※8° angled polish fiber adopt is optional.
| Common specification | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Collimate lens | Aspherical glass(visible light with AR coat) one configuration | ||||||||||||
| Housing materials | Aluminium(black anodized)・ＳＵＳ pipe | ||||||||||||
| Planned wave length | 650 nm | ||||||||||||
| Insertion loss | Less than 0.5 dB (λ = 400?1500 nm) | ||||||||||||
| Focus diameter | Adjustable(select that suit for the purpose) | ||||||||||||
NOTE：
＊Standard of use as collimate light：
・FCR/DD2.33 :Beam diameter φ0.33 mm / Less than WD 150 mm
・FCR/DD3.3 :Beam diameter φ0.5 mm / Less than WD 300 mm
・FCR/DD4 :Beam diameter φ0.6 mm / Less than WD 400 mm
・FCR/DD6.25 :Beam diameter φ1 mm / Less than WD 1500 mm
・FCR/DD8 :Beam diameterφ1.3 mm / Less than WD 2000 mm
